Pin It

Preparing to Have Walk in Coolers Installed

Posted By: alex

When you are having walk in coolers installed at your place of business, there are a variety of considerations you need to make, as well as ways you need to prepare for their installation. The right installer will help you determine the appropriate cooler, as well as what you need to do to ensure a stress-free installation.

Ventilation

One area that must be considered is where to place the condenser to ensure it receives the proper amount of ventilation. Most professionals recommend placing it on the roof of the exterior of the building as close to the unit as possible.

Power and Drain Lines

Consideration will need to be given to the type of electrical power you need for your unit, as well as where the location of the drainage pipes will be. It is important to consider these factors before purchasing your unit or having it delivered because it could have bearing on what you order and how it is installed. The location of your walk in coolers should be near a floor sink to obtain prime drainage. If this is impossible, you should discuss your needs with your professional before purchasing a cooler.

Permits

Walk in coolers might require special permission by your town. You should consult with the health department, as well as the building code department, to determine any special permits you might need. This is best done before any purchases are made in case any special accommodations need to be considered before the governing bodies will grant you the permit.

Warranty

While you always expect new products to work well right away, unforeseen things can happen. It is best to find a company that offers a decent warranty with your purchase to ensure you are protected in the event something goes wrong shortly after installation.

When you are looking to purchase walk in coolers for your business, there are many factors to consider before making the purchase. It is best to avoid assuming any unit will work in your place of business. You need to consider ventilation for the condensation unit, where the power and drain lines will be placed and if any special accommodations need to be made. In addition, it is vital that you consult with your city to determine if you need a permit. If you install a new cooler without a permit, you could be subjected to serious fines.

For more information about how to best prepare for the installation of walk in coolers, visit Turn Key Systems online at TKSWalk-in.com.

Be the first to like.