Trane are one of the most respected air conditioner brands in the USA. If you have a Trane air conditioner, there are various things that you should do to ensure that your unit runs safely and efficiently. Failure to follow these steps could result in costly damages and problems relating to home comfort.
The Spring Test
The springtime is when your air conditioning unit will really need to begin working. It’s important to test your air conditioner during the early spring to ensure that it’s running correctly. Air conditioning units will often act up when they haven’t been used for a long time, so early spring is the best time to see whether or not it will need a service. If it doesn’t work it’s important that you fix the problem before contractors start getting booked up.
Tripped Circuit Breaker
This is a very common issue with Trane air conditioners when they haven’t been used for a while. If your unit fails to turn on check the circuit breakers. If they have been tripped, that will almost certainly be the cause of the problem. Simply reset the circuit breakers and restart the system.
Thermostat settings could cause drastic heat differences in your home. Always check that your settings are set to cool and not to heat up. If your air conditioner is set to winter mode it won’t turn on automatically. Always make sure that the unit is set to turn on when the temperature reaches a certain heat. If everything is set accordingly, but the system still doesn’t work properly, then try resetting the thermostat.
Check the Unit
If your home still isn’t cooling properly, check both the outside and inside units to make sure they are running. If the outdoor system isn’t working, then the whole system needs to be reset. To do this turn off the Trane air conditioner and leave it for three hours.
Check Furnace Airflow
Always check the airflow around the furnace filters. If they are dirty or clogged up they won’t work with maximum efficiency. This will also cause further wear and tear, which could result in the failure of the entire system. If the filters are clogged, clean them before using the system.
The outside unit is just as important as the inside unit. If there is grass, weeds or anything else blocking the vents, then the airflow will be restricted. Clear out any obstructions around the unit before turning on the system.
If you are looking for Trane air conditioning repair Phoenix, then always consult a professional. Tackling the maintenance and repair process yourself could cause more harm than good, which could result in costly long-term bills.
Be the first to like.