If you live in an area that also experiences a “construction” season, you need to make sure that your brakes are in working order. While a lot of tell-tale signs will indicate that you need new brakes, the following signs are big clues that you need to schedule a repair:
1. Your car shakes jerkily when you brake
2. The brakes make a grinding noise whenever you stop
3. You need to apply extra foot pressure when coming to a stop
4. The brakes complain loudly when you stop at higher speeds or just after you make a stop
How Rotors and Pads Go Bad
When making a brake repair in Davenport IA, the mechanic usually replaces the pads and rotors. Whenever you brake, your pads press against the rotor. In turn, the kinetic energy produced by the rotor is transformed into thermal energy. The forward momentum creates heat during braking. So, if you brake a bit too hard, and do so frequently, you can damage the rotors and brakes.
Just like any brake repair, the sooner you take care of the problem, the better. If you wait too long, safety becomes a definite issue, as does the cost. So, as soon as you hear that familiar grinding noise, you need to take your car to the mechanic.
Have Your Car Serviced before It Requires a Repair
However, it may be even better if you take your car to the mechanic before you have to schedule a Bi-State Auto Service Center. By taking this approach, you can better ensure the safety of you and your family on the highway. Usually, brake pads should be replaced after every 15,000 miles, and the rotors should be replaced about every 50,000 miles.
So, before you have to schedule a brake repair, make sure your brakes are in top working order. Specialists in this type of work know what to check and can have your brakes in a safe condition in a short matter of time.