HVAC Technicians in Norwalk, CT, Inspect Furnaces After Basement Flooding

A flooded basement can cause damage to the furnace. Even if the flood level was relatively low, water reaching that appliance could result in serious problems. It’s best for the household residents to avoid turning on the furnace until it can be inspected by a technician specializing in heating, ventilation and air conditioning. Technicians working in HVAC in Norwalk, CT, can provide prompt service.

The Water Height

The height of the water will be directly associated with whether the furnace must be replaced or not. If the flood did not affect the motor, repair service should be successful.

Drying and Cleaning the Interior

Technicians providing service for HVAC in Norwalk, CT, will dry the interior of the appliance as rapidly as possible to prevent the initial stages of rust. The water may have contained substances that could be corrosive, so the parts that became wet should be cleaned. Corroded valves and controls can lead to expensive issues in the future.

Precautionary Measures


If a basement flood has happened more than once and the furnace has gotten wet, having a wall constructed around the appliance is advisable. The wall is typically built with concrete, and it stops water from reaching the furnace. This barrier should be no more than 3 ft. tall. Repeated basement flooding also indicates the need for a sump pump or a more effective sump pump system.

Concluding Thoughts

Heating technicians can inspect the furnace after it has gotten wet and take steps to keep it running properly. The website https://climatecarect.com/ provides information on the contracting company Climate Care. You can pay a visit to Facebook page for more information.

Sharing is caring!

shares