Stainless Steel Hose Ends – Changing The Hose Ends In Your Garden

Every garden needs to be maintained with regular watering if it is to bloom beautifully, therefore to ensure that your hose ends last for long, be sure to buy stainless steel hose ends. Stainless steel hose ends are an alternative to plastic hose ends and they are favored by gardeners because of their durability. Because hose ends come into contact with water, hard surfaces and UV rays on a regular basis, they can erode and dwindle in performance. When you purchase stainless steel hose ends, you can expect your hose ends to last longer with minimal investment.

Stainless Steel Hose Ends – Removing The Old Hose End

Before you can fit new stainless steel hose ends, you have to remove the old hose end. To do this, you should use a sharp knife. The knife will be able to penetrate the hosing material neatly, so that no jagged edges are present. By slicing through the material behind the hose end, you can discard the old piece and prepare the hose for the new fitting. Plastic fittings may need to be left in the sun or heated up with a hairdryer so that they can become flexible but with stainless steel parts, you can slide them on with ease.

Stainless Steel Hose Ends – Fitting The New Piece

Now that you have removed the old hose end and thrown it in the bin, you can take your new stainless steel hose ends and fit them. It is important to get the correct size hose ends. While most hosepipes will be the same size, it is possible that the thickness or diameter may differ so be sure to check this before you invest. Once you are sure that the hose ends are the proper size, you can slide the clamp over the end part of the garden hose. On the hose, you will find a barbed end. This should be placed inside the hose, so that this is out of sight but the stainless steel casing is on show.

Stainless Steel Hose Ends – Testing The Hose End

When you have placed the stainless steel hose ends over the hosepipe, you must test the garden water supply. If any water is escaping from the edges of the hose end, it is possible that the sizing is wrong or it is not screwed on tight enough. Make sure that you tighten the hose ends with a good screwdriver so that the barb and the hose are fastened tightly together. If leaks continue, there may be an underlying problem with the hosing material and in this instance, you ought to replace it.

It is worth buying stainless steel hose ends because they are very enduring and resist corrosion very well. To avoid complications with sun exposure and wear and tear, be sure to buy stainless steel fittings from Visit the website

Sharing is caring!