Asphalt can be used for a variety of surfaces. The most common surfaces made from this material include parking lots, driveways, walkways, and playground black tops. If you are thinking of having an asphalt surface installed, you may be curious how Asphalt Paving Toledo OH works. Here are the general steps for asphalt paving.
The very first step involves preparing the space where the asphalt is going to be laid. This involves removing large rocks from the area, flattening the area and then compacting sand and dirt. Prepping the area is very important, as it ensures your surface is flat and level. Another reason that the preparation process is important is because it helps keep the surface in place. Rain and run-off can soak through the asphalt, disturbing the soil underneath. Compacting helps prevent the ground from shifting and eroding, which can damage or crack your asphalt surface.
Laying the Asphalt:
The next step to Asphalt Paving Toledo OH is actually laying the asphalt. Depending on the size of your surface, the asphalt may be laid by hand, or a large machine may be brought in to lay the asphalt. Once the asphalt is fairly evenly spread out, a roller will be brought in to flatten the asphalt. If needed, more asphalt will be laid and flattened, to help create a level surface. This process will continue until the asphalt layers are satisfied that your surface is level. Once this is done, the asphalt will need to remain untouched for 24 to 48 hours, so it can harden, or cure.
Once the asphalt is completely hardened, is will be coated with a sealant. This process is referred to as asphalt sealcoating. Coating the asphalt does many things. First, a sealcoat fills in the pores naturally found in asphalt, which helps keep liquids, oils and other residues out of the oil. Secondly, the sealcoat reflects the suns ultraviolet rays, so they do not deteriorate the surface.
And lastly, the coating acts as a glue, holding the asphalt together, which reduces cracking and crumbling. After the coating is sprayed onto the surface, it has to sit for 24 hours. Once complete, your asphalt surface will be ready to be used. Get details on https://www.morlockasphaltltd.com