When someone has difficulty coming to a stop after they apply pressure to their brake pedal in their vehicle, they will need to get to a business that does Car Service Tulsa immediately to alleviate the problem. Failing to repair brakes in a timely manner can lead to the deterioration of the rotors, causing a more costly repair as a result. It is also dangerous to continue driving without the safety of a braking system that works properly. Here are some steps a motorist can take to stop their vehicle if the brakes do not seem to work as they should be.
Try Using The Emergency Brake
Every vehicle is equipped with an emergency braking system. The lever to engage the brake is usually located on the lower dashboard, near the driver’s seat, or in the console area. When using an emergency brake, it is best to pull the lever slowly, so the vehicle does not sway to one side during the process of stopping.
Pump The Brake Pedal
If there is an air bubble present inside the brake lines in a vehicle, brake fluid will not make its way to the brakes effectively. To dislodge this air, pumping up and down on the brake pedal with a foot is best. This will help push the liquid back and forth, popping the bubble so liquid can make its way to the proper location to stop the vehicle.
Shift Gears To Slow The Vehicle
A driver can try shifting into a lower gear to help slow the vehicle to safety. This should be done on an incline if possible to aid in the slowing process. The vehicle can then be driven slowly to the shoulder, and then the driver can put the vehicle into neutral until it stops altogether.
When there is a need to have brake service done, a motorist will need to contact a business that does Car Service Tulsa to come to the rescue. Call or visit the website of a reputable business like Tate Boys Tire & Service to make an appointment to have the vehicle evaluated and repaired.
