Although all auto issues should be evaluated quickly, with brakes, timing is essential. Thankfully for the area’s drivers, there are a few signs of trouble. Below are six ways to determine whether a car needs brake service in Phoenix AZ.
Slower Response
If the brakes aren’t responding as quickly as they should, it may be due to a fluid leak. A simple way to check is to look for fluid under the car when it’s parked. It may look like motor oil, only thinner and not as glossy.
Pulling
Unevenness in the brake linings can cause a car to pull to the side when the brakes are applied. If no adjustment is required, the fluid may simply need to be drained and replaced.
Thin Brake Pad Exterior
During braking, the outside of the brake pad is pressed on the rotor, which causes wear. Pads should be no less than one-quarter of an inch thick. Anything thinner points to a need for brake pad replacement and other services.
Screeching
These noises indicate brake pad wear, and they’re caused when a small metal piece on the brake assembly hits the rotor. Screeching brakes should be evaluated as soon as possible to prevent further damage to the braking system.
Brake Grinding
If a driver hears grinding noises coming from the car’s braking system, it’s a sign of the immediate need for brake service in Phoenix AZ. By this time, the pads are likely completely worn away, and there’s a significant chance that the brake rotors may need to be turned or replaced.
Vibration
When a brake pedal vibrates, it may be due to warping in the brake rotors. However, it may also indicate an alignment issue. In any case, the driver should bring the car in for an evaluation right away.
Whether a driver needs a wheel alignment or complete brake repairs, local auto shops are the place to go. ASE-certified technicians can handle every repair need regardless of vehicle model or make. Call or Visit us today to learn about the shop’s services, or go to the shop’s website to schedule service.
