There are many things that affect the air quality inside a building. For instance, cooking meals every day can produce airborne grease and other particulates that stick to the inside of the air ducts. Even worse, if the intake for the air handler is close to the kitchen, then it can also draw in these oily residue and particulates, which means that the air coming out of that comfort system is constantly polluted. One way of providing cleaner air is an improved filtration system, but even this is only a partial solution because the ducts can be contaminated while the HVAC is off. The best solution for this problem is professional duct cleaning Albany.
There are several methods used for cleaning ducts, but before beginning the process it is important to know what type of air ducts the comfort system uses. The most common kind of air duct is made from galvanized steel. This type of duct system is easier to clean. Unfortunately, some air duct systems are made from a type of insulated fiber panel. This type of duct is not so easily cleaned because most air duct cleaning Albany uses agitation or stiff bristle brushes to remove the debris. The only option in this case is the use of vacuum, but it may not provide that much of an improvement. However, cleaning the air handler will make the air quality somewhat better.
The most common methods for cleaning air ducts include the source removal method, point of contact cleaning and truck based vacuum systems. Source removal involves agitating the ducts so that the debris can be drawn out with reverse vacuum pressure. This is similar to the other options, but the vacuum is not usually truck based. One reason for this is that truck based cleaning systems can cause cross-contamination. That is, the exhaust from the truck can enter the ducts and affect air quality. Point of contact cleaning is a better solution for most people because this cleaning method uses a HEPA vacuum system to trap the dust and debris. Like source removal, the point of contact method will require some method of agitating the debris. In some cases, this will be forced air supplied through one or more vent registers, but brushes tend to be the preferred tool. Visit website for more information about duct cleaning and other services.
